Back to Blog
How-to Guides 2026-11-17 Haley Strategic Partners 0 views

Incog X GLOCK G17/G19 RH Holster: Cant, Retention & Draw Setup

Incog X GLOCK G17/G19 RH Holster: Cant, Retention & Draw Setup

Set up your right-hand Incog X holster for GLOCK G17/G19: use the supplied shims to tune cant, match your weapon light correctly, and build a safer draw.

Start with the exact handgun and light combination

Before you adjust cant or practice a draw, confirm that your pistol and light are on the fit list. The Incog X holster for GLOCK G17/G19 is compatible with a long list of GLOCK and other handgun models, including GLOCK 17, 19, 19X, 22, 23, 26, 45, and 47 generations listed in the product record, plus Shadow Systems MR920 and XR920, AREX Delta G2 models, and Zev 0Z9/0Z9C. The record also lists specific compact and large weapon lights.

The most important safety note in the supplied information: light-compatible holster models will not work without the weapon light installed, because there is not sufficient retention for safe use. If you remove the light, do not carry in that holster. This is a retention issue, not a preference.

What the right-hand Incog X package includes

  • Incog X® Holster for GLOCK G17/G19 Pistols - RH: The package includes (1) Incog X Holster for GLOCK G17/G19 - Right-handed and (3) Clip Strut Shims (1/8", 1/4", 3/8"). The shims are the supplied tool for adjusting how the holster sits on your belt, so you do not need to improvise cant changes.
    Incog X® Holster for GLOCK G17/G19 Pistols - RH
    Incog X® Holster for GLOCK G17/G19 Pistols - RH

Adjust cant with the supplied shims, then lock it in

The Incog X is described as a multi-positional, deep-concealment IWB hybrid holster. The supplied shims let you change the clip strut angle, which changes how the grip sits against your body. Work through one change at a time.

  1. 1. Unload and clear the pistol: Remove the magazine and verify the chamber is empty before handling the holster. Keep ammunition in another room while you adjust hardware.
  2. 2. Choose one shim size: The kit includes 1/8", 1/4", and 3/8" Clip Strut Shims. Start with the smallest change that moves the grip in the direction you want. The supplied information does not specify a recommended ride height or cant angle, so use your own comfort and concealment needs.
  3. 3. Fit the holster to your belt and check the grip: With the pistol holstered and the belt tightened, check whether the grip prints or digs into your side. A right-hand holster worn in appendix or strong-side positions will sit differently; the multi-positional design is intended to let you experiment.
  4. 4. Recheck retention after every hardware change: Any time you change a shim, confirm the holster still holds the pistol securely. The supplied information does not give a specific retention test procedure, so use a safe, empty-pistol check and do not carry until you are satisfied.

Retention tuning: what the record confirms and what it does not

The supplied information does not describe an adjustable retention screw or a tension-setting procedure for the Incog X holster. It does confirm that the holster is RDS compatible and designed for deep concealment, and that light-compatible models depend on the light being installed for safe retention.

That means retention tuning starts with correct fit: the right handgun, the right light, and the holster mounted on a belt that holds it firmly. If you are using a light-compatible model, install the listed light before you evaluate retention. For the compact light version, the record lists StreamLight TLR-7, TLR-7A, TLR-7 Sub, TLR-7 HL-X, Surefire XC-1-B, XC-1-C, XC-2, Inforce Wild 1, APL C, NightStick TCM-550XL, TCM-10, Sig Romeo Foxtrot 1X, Foxtrot 2R, and Viridian CTL. The large light version lists StreamLight TLR-1, TLR-1S, TLR-1 HL, Surefire X300U-B, X300U-A, NightStick TCM-30, TCM-850XL, Olight Valkyrie PL-PRO, PL-2, Inforce APL, and Holosun PID.

If your exact light is not on the supplied list, treat fit as unconfirmed rather than assuming it will work. The record does not provide a retention force specification, so do not rely on a number.

Fit and light compatibility at a glance

  • Incog X® Holster for GLOCK G17/G19 Pistols - RH: Weapon Fit Note: compatible with GLOCK 17 Gen 3 through Gen 6, GLOCK 19 Gen 3 through Gen 6, GLOCK 19X, GLOCK 22 Gen 3-4, GLOCK 23 Gen 3-4, GLOCK 26 Gen 3-5, GLOCK 45, GLOCK 45 Gen 6, GLOCK 47, Shadow Systems MR920, XR920, AREX Delta G2 (X), (M), (L), Zev 0Z9, and Zev 0Z9C. Use this list to confirm your pistol before adjusting cant or practicing a draw.
  • Incog X® Holster for GLOCK G17/G19 Pistols - RH: Light-compatible holster models will not work without the weapon light installed as there is not sufficient retention for safe use. This is a hard safety condition: do not carry a light-compatible Incog X without the light mounted.

Build a right-hand draw practice routine

The Incog X is designed for multi-positional carry, so the same draw motion will not fit every position. Practice slowly with an empty pistol and confirm each step before adding speed. The supplied information does not include a manufacturer draw-training protocol; the sequence below is a general safe practice framework built around the holster's features.

  • Start with the garment and grip: Clear your cover garment deliberately. With a right-hand holster, establish a full firing grip before pulling. The mag caddy, if you use one, attaches to the holster with an angled connection intended to create an ergonomically efficient and tactile draw; keep that caddy out of the way of your firing-hand draw.
  • Draw straight and clear the holster: Pull smoothly until the pistol clears the holster. The deep-concealment design may require more clearance than a range holster, so practice with the exact belt and clothing you plan to wear.
  • Reholster with attention: Look the pistol back into the holster. The supplied information does not describe a specific reholstering procedure, so keep the movement slow and deliberate, especially with a light-compatible model where retention depends on the light being installed.
  • Check the shim choice under movement: After a few draw repetitions, confirm the holster has not shifted on the belt. If the grip position changes, revisit the shim size and belt tension before continuing.

Compact light vs. large light: choose before you set cant

The supplied record lists two light-compatibility groups. Your light choice affects holster dimensions and how the rig sits, so settle it before fine-tuning cant.

  • Compact light models: Fit includes StreamLight TLR-7 family, Surefire XC-1/XC-2, Inforce Wild 1 and APL C, NightStick TCM-550XL and TCM-10, Sig Romeo Foxtrot 1X and 2R, and Viridian CTL.
  • Large light models: Fit includes StreamLight TLR-1 family, Surefire X300U-B and X300U-A, NightStick TCM-30 and TCM-850XL, Olight Valkyrie PL-PRO and PL-2, Inforce APL, and Holosun PID.
  • Both groups share the same safety rule: Do not use a light-compatible holster without the listed light installed; retention is not sufficient for safe use.

What the supplied information does not confirm

The record does not provide a specific cant angle, ride height, retention force, break-in period, or maintenance schedule for the Incog X holster. It also does not confirm compatibility with weapon lights beyond the listed models. For those details, check the manufacturer's current documentation rather than guessing. The product is described as designed and built in collaboration with Safariland, and the right-hand GLOCK G17/G19 version is the model covered here.

Related Articles

Customer Service
Home
Products
Cart
Profile