Steel G-Hook Pair: How to Attach and Use on Your Gear

Quick answer

To attach the Steel G-Hook Pair, thread the hook through your gear's webbing or loop, then clip it onto a compatible attachment point such as a placard or sling. The G-Hooks are directly compatible with the MOD Placard family and provide a low-profile, secure connection. Always check that the hook is fully seated and the loop is not twisted before use.

Why steel G-hooks beat plastic clips

Plastic clips can crack or wear out, especially under heavy use. The Steel G-Hook Pair offers a durable, low-profile alternative that maintains a secure hold without adding bulk. Precision-cut from steel and made in the USA from USA materials (Berry Compliant), these hooks are built for strength and reliability. They are directly compatible with the MOD Placard family, making them a smart upgrade for your gear.

Tools and preparation

Before you start, gather your Steel G-Hook Pair, the gear you want to attach them to (such as a placard or sling), and any necessary tools like a flat-head screwdriver or pliers if your setup requires removing existing hardware. Work in a well-lit area and inspect your gear for wear or damage that could affect attachment.

Step-by-step installation

• Step 1: Identify attachment points. Locate the webbing loops or slots on your gear where you want to attach the G-hooks. Common spots include the sides of a placard or the ends of a sling. Mistake to avoid: forcing a hook into a space that is too tight, which can damage the hook or the gear.
• Step 2: Thread the hook. Pass the open end of the G-hook through the loop or slot, then rotate it so the hook's curve sits flush against the webbing. Checkpoint: ensure the hook moves freely but does not slide out on its own.
• Step 3: Connect to the receiving point. Clip the G-hook onto the corresponding attachment point, such as a D-ring or loop on your sling or placard. You should hear or feel a positive click or snap. Mistake to avoid: not pushing the hook all the way closed, which can lead to accidental release.
• Step 4: Test and adjust. Gently tug on the connection to verify it is secure. If using multiple hooks, make sure they are oriented consistently for easy access. Checkpoint: the hook should not rotate excessively or bind against other gear.

Using G-hooks with slings and placards

The Steel G-Hook Pair works well with the D3 Pro Sling, which features a pivoting-cam slider and rubberized Ultracomp for comfort and control. Attach the G-hooks to the sling's attachment points to create a modular connection that allows for quick adjustments. When used with a placard, the hooks provide a low-profile way to secure the placard to your chest rig or plate carrier. Always follow the manufacturer's guidelines for your specific gear to ensure compatibility.

Installation steps at a glance

1. Prepare your gear: Clear your workspace and inspect the attachment points for damage. A clean start prevents mid-install surprises.
2. Thread the hook: Pass the G-hook through the webbing loop and rotate it into position. The hook should sit flush without twisting the webbing.
3. Clip and test: Snap the hook onto the receiving point and tug gently to confirm it is secure. A firm tug ensures the hook is fully engaged.

Product facts

• Steel G-Hook Pair: G-Hooks provide a low-profile, fast, and secure hardware attachment point for placards. Precision-cut for strength and reliability, without added bulk. The G-Hooks are directly compatible with the MOD Placard family. Made in the USA from USA materials (Berry Compliant). Item comes with (2) Steel G-Hooks. These hooks offer a durable, streamlined alternative to plastic clips, ensuring a secure fit on compatible gear.